#!/usr/bin/env -S just --justfile

PORT := env("PORT", "/dev/ttyACM0")
BOARD := env("BOARD", "lgt8fx:avr:328")


[working-directory: 'firmware/pump_encoder']
build:
    arduino-cli compile --fqbn "{{BOARD}}"


[working-directory: 'firmware/pump_encoder']
upload:
    arduino-cli upload --port "{{PORT}}" --fqbn "{{BOARD}}"


[working-directory: 'firmware/pump_encoder']
install-libs:
    arduino-cli lib install "EncButton@3.7.3"
    arduino-cli lib install "GyverTM1637@1.4.2"